Our Certification Marks & Logos

Certificates and Use of Logo(s) 

All certificates issued by CCI remain the property of CCI and must be returned when requested.
Certificate holders must ensure that no incorrect references to CCI certification system or misleading use of certificates or marks occur.

CCI Registered Companies Logo is granted under licence to those client companies who have obtained certification by CCI after successful assessment to the applicable standard.

Where the CCI Registration Certificate has been issued under IAR, the Accreditation Body logo is too used in combination with the CCI Registered companies logo, as applicable.

CCI CERTIFICATION LOGO

 Company Certification International Services® (CCI Services) Registered Companies Logo can be applied to stationery and publicity material that relates to the company Scope of Registration. This can include brochures, product cards, advertisements etc.
The mark shall not be used on laboratory test reports, calibration and inspection certificates and not applied directly to the product or packaging, whether secondary or primary or in such a manner as to imply that any individual product has been approved. Type labels or identification plates are considered as part of the product Where the logo is used, the Certificate Registration number must also be clearly indicated.
The logo may only be reproduced in a single colour which is unlimited, but where practical should conform to existing preprinted stationery, brochures, letterheads or other promotional materials of the Company.

Use of Logo(s) 

  1. Upon successful completion of Initial Assessment CCI shall issue Certificate(s) of Approval to the organization detailing the  Standard(s) to which assessment was made, declaring the scope of supply. The Certificate(s) of approval is/are valid for a period of three years from the date of issue subject to satisfactory maintenance of the management systems through surveillance audits.
  2. Certification under this scheme does not imply certification of the organization’s product or service and does not, therefore, exempt him from his legal obligations.
  3. The organization undertakes to institute a system of registering all complaints received from any source. The corrective action(s) taken and review by Organization Management of such actions shall be made available for verification. They will inform that the complainant can also write to CCI
  4. CCI has a certification mark that authorizes certified clients to use as shown in the picture below. Clients can use this logo in such a way that it is not ambiguous, in the mark or accompanying text, as to what has been certified and with clarity that CCI has granted the certification.
  5. The client is advised not be use the CCI/IAR logo on a product nor product packaging nor in any other way that may be interpreted as denoting product conformity.
  6. CCI will not permit its marks to be applied by certified clients to laboratory test, calibration or inspection reports or certificates.
  7. The client of CCI may use the following statement on the product packaging or in accompanying information that the client has a certified management system. Product packaging is considered as that which can be removed without the product disintegrating or being damaged. Accompanying information is considered separately available or easily detachable. Type labels or identification plates are considered as part of the product. The statement shall in no way imply that the product, process or service is certified by this means. The statement shall include reference to:
    • Identification (e.g. brand or name) of the certified client;
    • The type of management system (e.g. quality, environment) and the applicable standard;
    • Empowering Assurance Systems or CCI.
  8. CCI through a legally enforceable service Contract CCI 004 requires that the certified client follow:
  9. a) Conforms to the requirements of CCI and IAR when making reference to its certification status in communication media such as the internet, brochures or advertising, or other documents;
    b) Does not make or permit any misleading statement regarding its certification;
    c) Does not use or permit the use of a certification document or any part thereof in a misleading manner;
    d) Upon withdrawal of its certification, discontinues its use of all advertising matter that contains a reference to certification, as directed by CCI.
    e) Amends all advertising matter when the scope of certification has been reduced;
    f) Does not allow reference to its management system certification to be used in such a way as to imply that CCI has certified a product (including service) or process;
    g) Does not imply that the certification applies to activities and sites that are outside the scope of certification;
    h) Does not use its certification in such a manner that would bring CCI and/or certification system into disrepute and lose public trust.

In case of default, CCI will initially inform them through the mail. If the client still continues, CCI will adopt the legal course of action against the client for his incorrect references to certification status or misleading use of certification documents, marks or audit reports.

ACCREDITATION LOGO

The Accreditation Logo may only be used in combination with the CCI Registered companies Logo and is limited to stationery, literature and other written promotional materials. It cannot be applied to the product or packaging and visiting cards whether secondary or primary. The Accreditation Logo shall be reproduced in accordance with the artwork enclosed or in a single colour to confirm with the predominant colour of existing preprinted stationery, brochures, letterheads or other promotional material.

The Accreditation Logo shall not be used in such a way as to suggest that the Accreditation Body or government Organization it represents have certified or approved the activities of the Company, or in any other manner which can mislead.

The Certification Body/Accreditation Logo may be uniformly reduced or enlarged but shall not be less than 25 mm in height.

If an accredited certificate holder fails to comply with these regulations or uses the logos in any misleading manner, CCI reserves the right to withdraw or cancel its certificate upon which action, the certificate holder shall immediately cancel to use the logos and withdraw the existing stock of its stationery and other promotional brochures etc. bearing the logos, from further use.

Such action could include requests for correction and corrective action, suspension, withdrawal of certification, publication of the transgression and, if necessary, legal action.

The Certification Process

Online gap analysis allows us to see the current

  • quality benchmark within your organization,
  • the finances required
  • the time required for this project (System and Certification Fee)

Your Estimate will be shared with you in 24 hours.

Upon Estimate Approval the project starts:

  • A client executive is assigned to your project
  • Contact information is shared with you
  • The Payment details are provided to you

All Support is delivered Online.

The Client Executive will provide the Documentation Templates and explain to you how to amend it.
You will be required to perform the following tasks:

  1. Identify your core or business processes.
  2. Amend documentation that meets your business needs. (Policy statements, objectives, manuals, work instructions, job descriptions, forms.)
  3. Encourage employees to be aware of the new documented system
  4. Review, approve, and distribute the documents to those who need access to the information.

  • Ensure procedures are being performed as documented.
  • Ensure employees are trained properly for the tasks they are performing.
  • Create effective reporting systems.
  • Monitor the effectiveness of your processes through the use of measurable data, where possible.
  • Review and take action to improve in the areas required.
  • Plan internal auditing activities.
  • Submit your management system documentation for review to ensure it complies with the applicable standard.
  • Prepare for review by an external auditor to confirm that the system’s requirements are being satisfied and that the management system is implemented effectively.
  • Obtain ISO Certifcaiton
  • This periodic on-site review is usually conducted annually.
  • It ensures that the certified business continues to comply with Standard requirements, as confirmed during the Recertification Audit at the certification cycle's outset.
  • Most are conducted remotely.

Refer to learn more about Types of Audits

FAQ's

Starting with your initial consultation with our ISO specialists and progressing through certification, the timeline can be as short as 15 days. However, the duration is contingent upon the size and complexity of your business. It's worth noting that we can often expedite the process and reduce costs by preparing the Documented Management System Manual on your behalf, which can also accelerate the certification for your business.

Following ISO 17021 guidelines, accredited certification bodies must provide certified organizations with certificates covering a 3-year certification cycle. Extensions beyond this timeframe are possible with the completion of necessary external audits and adherence to the certification cycle. ISO Certification, for instance, commonly issues certificates throughout a ten-year contract period.

At Company Certification, our dedication is to ensure that ISO certification remains cost-effective for all our clients. The expenses involved depend on various factors including your industry sector, annual turnover, number of employees, and other considerations. Feel free to utilize our complimentary calculator to receive an instant quote.

ISO certification is reserved for organizational entities, and not for individual professionals.

An internal audit is a systematic and scheduled examination of the processes and procedures outlined in your management system. It serves as a vital component of ISO Standards compliance, ensuring that established processes are adhered to and validating the effectiveness of the implemented procedures.

The advantages of conducting an internal audit include:

  • Ensuring the achievement of goals and objectives.
  • Enhancing communication and understanding within the organization.
  • Offering individuals a platform to report concerns.
  • Serving as an effective training tool.
  • Verifying the maintenance of planned arrangements, such as product quality.
  • Providing valuable feedback to supervisors.

To formulate an internal audit schedule, you must determine the scope and timing of the audits. This information is documented in the internal audit schedule, a crucial document for consultants to review. For intricate processes, it may be necessary to conduct audits in distinct segments. Additionally, if particular areas have a history of recurring issues, more frequent and detailed checks may be required. When constructing the schedule, it's essential to consider past non-conformities.

Kosher/Halal Need Analysis

 
1 Start 2 Complete
Please provide your firm's legal name.
Your cell number
Where project needs to be implemented
Estiamted man power including contractor staff and permenant employees.
Approximately, how many finished products does your company produce (regardless of their kosher status)?
YesNo
Is this facility firstly yours and secondly, dedicated to these Kosher/Halal intended products?
Does this facility re-label products?
Does this facility repack products?
Are any of your finished products manufactured in this facility also produced at other sites?
Does this facility manufacture products for a brand that you do not own?
How are your products made? (Do you have a flow chart that describes the production process?)
Are all the ingredients(recipe) and processing aids used in the products you wish to become Kosher/Halal certified are defined?
Are other products not intended for Kosher/Halal certification are made in the same facility?
Do you have letters of Kosher/Halal certification from your suppliers for any of your ingredients?
Does your company provide contract manufacturing services to others?
Has your company been Kosher/Halal certified before?
Do you require certification quotes/estimates with our consulting charges?