Our Certification Marks & Logos
Certificates and Use of Logo(s)
All certificates issued by CCI remain the property of CCI and must be returned when requested.
Certificate holders must ensure that no incorrect references to CCI certification system or misleading use of certificates or marks occur.
CCI Registered Companies Logo is granted under licence to those client companies who have obtained certification by CCI after successful assessment to the applicable standard.
Where the CCI Registration Certificate has been issued under IAR, the Accreditation Body logo is too used in combination with the CCI Registered companies logo, as applicable.
CCI CERTIFICATION LOGO
Company Certification International Services® (CCI Services) Registered Companies Logo can be applied to stationery and publicity material that relates to the company Scope of Registration. This can include brochures, product cards, advertisements etc.
The mark shall not be used on laboratory test reports, calibration and inspection certificates and not applied directly to the product or packaging, whether secondary or primary or in such a manner as to imply that any individual product has been approved. Type labels or identification plates are considered as part of the product Where the logo is used, the Certificate Registration number must also be clearly indicated.
The logo may only be reproduced in a single colour which is unlimited, but where practical should conform to existing preprinted stationery, brochures, letterheads or other promotional materials of the Company.
Use of Logo(s)
- Upon successful completion of Initial Assessment CCI shall issue Certificate(s) of Approval to the organization detailing the Standard(s) to which assessment was made, declaring the scope of supply. The Certificate(s) of approval is/are valid for a period of three years from the date of issue subject to satisfactory maintenance of the management systems through surveillance audits.
- Certification under this scheme does not imply certification of the organization’s product or service and does not, therefore, exempt him from his legal obligations.
- The organization undertakes to institute a system of registering all complaints received from any source. The corrective action(s) taken and review by Organization Management of such actions shall be made available for verification. They will inform that the complainant can also write to CCI
- CCI has a certification mark that authorizes certified clients to use as shown in the picture below. Clients can use this logo in such a way that it is not ambiguous, in the mark or accompanying text, as to what has been certified and with clarity that CCI has granted the certification.
- The client is advised not be use the CCI/IAR logo on a product nor product packaging nor in any other way that may be interpreted as denoting product conformity.
- CCI will not permit its marks to be applied by certified clients to laboratory test, calibration or inspection reports or certificates.
- The client of CCI may use the following statement on the product packaging or in accompanying information that the client has a certified management system. Product packaging is considered as that which can be removed without the product disintegrating or being damaged. Accompanying information is considered separately available or easily detachable. Type labels or identification plates are considered as part of the product. The statement shall in no way imply that the product, process or service is certified by this means. The statement shall include reference to:
• Identification (e.g. brand or name) of the certified client;
• The type of management system (e.g. quality, environment) and the applicable standard;
• Empowering Assurance Systems or CCI. - CCI through a legally enforceable service Contract CCI 004 requires that the certified client follow:
- a) Conforms to the requirements of CCI and IAR when making reference to its certification status in communication media such as the internet, brochures or advertising, or other documents;
b) Does not make or permit any misleading statement regarding its certification;
c) Does not use or permit the use of a certification document or any part thereof in a misleading manner;
d) Upon withdrawal of its certification, discontinues its use of all advertising matter that contains a reference to certification, as directed by CCI.
e) Amends all advertising matter when the scope of certification has been reduced;
f) Does not allow reference to its management system certification to be used in such a way as to imply that CCI has certified a product (including service) or process;
g) Does not imply that the certification applies to activities and sites that are outside the scope of certification;
h) Does not use its certification in such a manner that would bring CCI and/or certification system into disrepute and lose public trust.
In case of default, CCI will initially inform them through the mail. If the client still continues, CCI will adopt the legal course of action against the client for his incorrect references to certification status or misleading use of certification documents, marks or audit reports.
ACCREDITATION LOGO
The Accreditation Logo may only be used in combination with the CCI Registered companies Logo and is limited to stationery, literature and other written promotional materials. It cannot be applied to the product or packaging and visiting cards whether secondary or primary. The Accreditation Logo shall be reproduced in accordance with the artwork enclosed or in a single colour to confirm with the predominant colour of existing preprinted stationery, brochures, letterheads or other promotional material.
The Accreditation Logo shall not be used in such a way as to suggest that the Accreditation Body or government Organization it represents have certified or approved the activities of the Company, or in any other manner which can mislead.
The Certification Body/Accreditation Logo may be uniformly reduced or enlarged but shall not be less than 25 mm in height.
If an accredited certificate holder fails to comply with these regulations or uses the logos in any misleading manner, CCI reserves the right to withdraw or cancel its certificate upon which action, the certificate holder shall immediately cancel to use the logos and withdraw the existing stock of its stationery and other promotional brochures etc. bearing the logos, from further use.
Such action could include requests for correction and corrective action, suspension, withdrawal of certification, publication of the transgression and, if necessary, legal action.
The Certification Process
Online gap analysis allows us to see the current
- quality benchmark within your organization,
- the finances required
- the time required for this project (System and Certification Fee)
Your Estimate will be shared with you in 24 hours.
Upon Estimate Approval the project starts:
- A client executive is assigned to your project
- Contact information is shared with you
- The Payment details are provided to you
All Support is delivered Online.
The Client Executive will provide the Documentation Templates and explain to you how to amend it.
You will be required to perform the following tasks:
- Identify your core or business processes.
- Amend documentation that meets your business needs. (Policy statements, objectives, manuals, work instructions, job descriptions, forms.)
- Encourage employees to be aware of the new documented system
- Review, approve, and distribute the documents to those who need access to the information.
- Ensure procedures are being performed as documented.
- Ensure employees are trained properly for the tasks they are performing.
- Create effective reporting systems.
- Monitor the effectiveness of your processes through the use of measurable data, where possible.
- Review and take action to improve in the areas required.
- Plan internal auditing activities.
- Submit your management system documentation for review to ensure it complies with the applicable standard.
- Prepare for review by an external auditor to confirm that the system’s requirements are being satisfied and that the management system is implemented effectively.
- Obtain ISO Certifcaiton
- This periodic on-site review is usually conducted annually.
- It ensures that the certified business continues to comply with Standard requirements, as confirmed during the Recertification Audit at the certification cycle's outset.
- Most are conducted remotely.
Refer to learn more about Types of Audits